The operating Rules and repairs of Sand Making Machine

The Operating Rules Of The Sand Making Machine

Checking the whirlpool cavity’s observation door whether it is closed tightly, in case the materials is fired from the observation door, to cause danger. Checking the rotation direction of the impeller .The impeller should rotate in the counter clockwise, or the electro motor’s wiring should be adjusted.

The start sequence of the crushing breaker and convey equipment. Discharge →breaker→feed Breaker muse be started up under no loading condition, the materials should be fed after the breaker is in good order.

The sequence of shut down and start up is opposite. The feed size should be according to the requirement of every kind of machine strictly, materials over the requirements must be forbidden otherwise imbalance is produced and the impeller is wired heavily, even the tunnel of impeller and middle of feed tube will be jammed, as a result the machine can’t work well. Feeding should be continuous and even, The huge shake and abnormal noise shouldn’t exist in the process of the operation, or the Sand Making machine should be shut down and checked.

The style of lubrication is dry-oil lubrication; the mobile automobile-used lubricating grease and 3 # spodumene grease should lubricate the machine, proper grease should be added to the breaker per 100 hours.

The Repairs And Safety Technologies Of The Sand Making Machine

Turn off the Sand Making machine regularly and open then observation door to watch the information of the machine ‘s wear, including the middle tube’s ,cone cover’s ,impeller’s, lower tunnel layer’s, throwing materials part’s, if there is heavy wear ,they should be replaced or repaired in time, when changing the cast hammer head ,pay attention then weigh is the same as the replaced one .The wear impeller should be replaced or repaired by factory in time ,Note :without the factory’s agreement ,customers are not allowed to make the Impeller themselves, opening the observation door is forbidden in the process of machine ‘s operation, in case the danger happened, or the customers should take the responsibility.

The top bearing of the main bearing assembly is the movable end, the downside bearing is the fixed end, after installation the belt should rotate smoothly, the main bearing is added by proper lubrication grease per 100 hours, the main bearing should be cleaned per 2000 hours .According to the information of usage and maintenance, the bearing should be replaced per 5000 hours.

Because the Sand Making machine is operation at high speed, customers should note the safety operation; related person should be far away from the equipment. if there is need to repair on the machine.

You Maybe Also Interested In :

Stone Crushing Machine: We offer stone crushing plants that are very effective in road projects. Designed and developed as per the international quality standards...

Concrete Crushing Machine: Concrete is a composite construction material composed of cement and other cement materials such as fly ash and slag cement...

Mining Equipment: The Mining Equipment Prospector is a resource locator of mining equipment from around the globe, to deal with mineral, rocks, stones, ore...

Back To Products Line And Knowledge Center

  Top